[Elecraft] K2-6957 thanks and a question

[Don Wilhelm]

Frank,

There is a protective series diode in the K2 - the internal K2 display 
reads the voltage on the K2 side of that diode.  Due to the diode drop, 
the voltage on the power supply side of that diode will be greater.

73,
Don W3FPR

On 1/1/2012 5:03 PM, kf4clo wrote:
> Hi
> My thanks to Don,Alan and Richard for thier help locating the PA
> problem,without them I would have had to send it to Elecraft.
>   When hooked to the power supply the supply shows 13.5v and the display on
> the K2 13.1. It dosen't
> matter what power supply or battery I use the results are the same. Its been
> like that since it was
> new. I've had no problems with the K2 other than th PA's last week? Anything
> to worry about here?
>                                                              Thanks Frank
> kf4clo
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K2-6957-thanks-and-a-question-tp7142663p7142663.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>