[Elecraft] AD-1-K doesn't have blocking capacitor, Heil claims
Eric Swartz - WA6HHQ, Elecraft
eric at elecraft.com
Fri Feb 24 19:06:55 EST 2012
If Mic Bias = OFF in the K3 mic menu, a blocking cap is not required for
the Heil dynamic mics.
The AD 1-K is Heil's Headset to K3 adapter. (Also for Kenwoods.) No
blocking cap inside.
73,
Eric
---
www.elecraft.com
On 2/24/2012 2:39 PM, Buck - k4ia wrote:
> Yes but. . .
>
> The Mic pinout used by Elecraft is the Kenwood pinout. So, you would
> use a Kenwood adapter with a Heil product. Hence the issue with the
> blocking cap - unless Heil has now made available a mic adapter cable
> specifically for the Elecraft line.
>
> Buck
> k4ia
>
>
> On 2/24/2012 2:53 PM, Dick Dievendorff wrote:
>> Bob Heil just told me that only the ICOM Heil adapters have blocking
>> capacitors.
>>
>>>> Of course NONE of the Kenwood or Yaesu have any blocking caps as none of
>> their inputs have phantom voltage (thank goodness)
>>
>> Dick, K6KR
>>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
>> Sent: Friday, February 24, 2012 11:32 AM
>> To: Tom
>> Cc: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] Heil Proset Headphones
>>
>> Tom,
>>
>> Since you have the Icom adapter now, I must ask - Is that a Proset-Ic?
>> You can find the "Ic" designation in the end of the microphone tube that
>> attaches to the earphone.
>> If it is an "Ic" type, it has an electret microphone element which requires
>> bias.
>> I believe the Kenwood adapter has a blocking capacitor that will prevent the
>> bias voltage from reaching the mic element.
>> If you are using this with a K3, just plug it into the rear panel jack, no
>> need for an adapter. If you are using it with the K2, rewire the Microphone
>> Configuration Header to match your Icom adapter.
>>
>> 73,
>> Don W3FPR
>>
>> On 2/24/2012 1:58 PM, Tom wrote:
>>> I have the headset with the adapter for my Icom 756Pro. Which Heil
>>> adapter do I need to use the headset with the K3? AD-1-K?
>>>
>>> Tom
>>> KQ5S
>>>
More information about the Elecraft
mailing list