[Elecraft] K3 Setup and CM500 Headset Questions

[Greg]

Byron,

Go to the main menu and select rp AND tap the "2" button to turn bias on
that is needs by that mic.  You do not need mic+line.

Gl
73
GREG
AB7R
 On Feb 20, 2012 8:50 PM, "Bryon" <nnegrom at gmail.com> wrote:

> Hello everyone. I have a couple questions for you. I have browsed the
> archives and I was not seeing anything that was helping.
>
> This is a new K3 to me, the guy before was primarily a CW operator. He did
> not even own a mic. So I decided to buy the Yamaha CM500 headset and was
> trying to get it all setup this evening. Below is some of the things I have
> tried. In short, I am looking for the settings you have found to work.
>
> I am following the Fred Cady guide that I bought online. I am in the
> setting up
> SSB section.
>
> I was in test mode. When I was not in test mode I could get the TX light to
> come on via the PTT foot pedal, the XMIT button and never VOX. I never
> heard myself in test mode even when messing around with the Monitor,
> Compression, MicGain, VOX Gain and the VOX Interrupt, Mic+Line (off). I am
> using the Front Panel, Low, Heil adapter. I tried the
> headphones/mic on the computer, they sound great and the mic picks up very
> well.
>
> So, with VOX not going off at all. I suspect the mic connection is not
> getting to the radio. My headphones came with 1/8" to 1/4" adapters. 1
> stereo and 1 mono.
>
> the mic on the headset is 1/8" and goes directly into the adapter along
> with the 1/4" PTT pedal. I then have the stereo 1/8" to 1/4" for the audio
> and that is plugged into the front. I also wasn't sure what to connect
> it to on the back since there are warning messages near the stereo
> connectors on the back. I was afraid
> to mess with anything there.
>
> Is it a bias issue? A connector issue? Software setting?
>
> Thanks in advance for any assistance.
>
> Bryon / W7RIV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>