[Elecraft] How much rejection should I expect?
Rick Tavan N6XI
rtavan at gmail.com
Mon Feb 20 13:43:46 EST 2012
Your situation is essentially two stations in the same location. It's like
a multi-transmitter contest station. A set of bandpass filters should let
you operate on a different band than your neighbor, needing only to avoid
the immediate vicinity of his harmonics. But operating on the same band
would require very sophisticated filtering and probably staying on opposite
ends of the band and therefore on different modes. I don't recommend it.
/Rick N6XI
On Mon, Feb 20, 2012 at 10:01 AM, Allen Brier N5XZ <n5xz at earthlink.net>wrote:
> I have a neighbor on the next street...our antennas are only about 800
> feet apart (according to Google maps). I know he doesn't run 1500 watts
> (luckily) but I think he does run 300 - 400 or so. My question is, how much
> receiver rejection and/or overload should I expect? He pretty much tears up
> the entire band on my K3 if my antenna is pointed his way, but not quite so
> bad on the side. On my P3, the entire noise floor is raised many S units
> (I'll have to switch to dB and see what it looks like.
>
> Should I expect better, or is this to be expected. I know I haven't
> provided any real details, but I think many will get the idea.
>
> Unfortunately, we're both primarily CW ops!
>
> Allen N5XZ K3 #2324
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Rick Tavan N6XI
Truckee, CA
More information about the Elecraft
mailing list