[Elecraft] K3 TX delay

[Igor Sokolov]

That is right Nick. That is because your TX delay is set at 8 ms. But if 
Rx/Tx  transition time of your AL-811 is greater then 8 ms you get "hot 
switching" every time your start to transmit.

73, Igor UA9CDC

>I use semi-break-in with my AL-811 amplifier.
>
> TX delay set to 8 ms. Key Out line to amplifier. No separate PTT switch
> - T/R control by paddle only.  Semi-break-in delay set to 0.5.
>
> I do not get choppy CW.
>
> 73-
>
> Nick, WA5BDU
>