[Elecraft] KPA500 Voltage Test Problem

[Timothy Eklin]

I got it.  I'm at 76 Volt on the HV now.  It appears that I did not have
one of the ribbon cables aligned properly.

On Sun, Feb 12, 2012 at 12:22 PM, Timothy Eklin <tme1964 at comcast.net> wrote:

> I just assembled my KPA500.  I'm using it on 240 VAC line and have the
> fuse configured for this set up.  The "Yellow" wire in on the TAP and when
> I did the initial test, I'm showing 16.8 Volts on the HV meter which is
> along way from 65 to 85 Volts as expected.  Ideas as to what's wrong?
>
> 73 W8JJ
>