[Elecraft] [K3] KXV3A fails 1 mW calibration

[Don Wilhelm]

Did you forget to cut the jumpers when you installed the KXV3A?

73,
Don W3FPR

On 2/12/2012 11:22 AM, Pierfrancesco Caci wrote:
> I get the following error when trying the 1 mW calibration for a freshly
> installed KXV3A:
>
> Starting 1 milliwatt calibration.
> Calibrating at 1.900 MHz
> IsSamplingComplete: Unexpected response 'DB 0.10 MW;' to ''. State 220
> Calibration power settled at ' 0.10 MW;'
> 1 milliwatt calibration failed.
> Elapsed time: 19.2 secs
>
>