[Elecraft] KPA500 PWR ADJ Figures

[Keith]

Start at 100 for every band.  If you were to reset the memory, it will 
default to 100 on each band.
That is where we start at the factory.
Keith

On 2/10/2012 1:20 PM, dpopski at comcast.net wrote:
> Lets try this again. Out of the more than 600 + KPA500 owners I would think I could get some information from more than 1 guy in Elecraft land.
>
> Here is what I want to know.
>
> If you have a factory assembled KPA500, what is the PWR ADJ number per band as shown in the menu under "PWR ADJ"? Since Elecraft should have calibrated the watt meter at the factory and they don't the kits, this would give me a good reference point to calibrate a kit .
>
> If you built a kit and calibrated your watt meter with a known source, then what is the PWR ADJ number per band ?
>
> 73
> David KC8IV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>