[Elecraft] K3 and K2 simultaneous on serial to USB cables to computer

[Chip Stratton]

Yes, and I'm using an appropriately wired serial jumper between the K2
and the USB to serial adapter.

I also have not tried any PTT/CW keying with this adapter, so can't
comment on that.

Chip
AE5KA

On Fri, Feb 10, 2012 at 11:12 AM, Bob Nielsen <n7xy at clearwire.net> wrote:
> You will need to make a jumper cable between the K2 and your serial-to-USB cable.  See Figure 7 on Page 13 of the KIO2 manual for the connections.
>