[Elecraft] (KX3) 472-479 KHZ Ham Band at WRC (update)

[Wayne Burdick]

The short answer is "yes", and it will put out a lot more than 1 mW.  
The KXAT3 ATU module includes supplemental filtering for this range,  
too, that functions in both RX and TX modes. Whether you'll be able to  
use the KX3 in this range without an external low-pass filter has not  
been determined.

Wayne
N6KR


On Feb 7, 2012, at 8:12 AM, Edward R. Cole wrote:

> http://www.arrl.org/news/agenda-item-1-23-passes-committee-moves-to-plenary
> On my inverted-L, ERP=1w implies transmitting 25w into the antenna.
> Question will be if the KX3 will be able to receive or transmit on
> those frequencies.  My K3 will go down to 490 at 1mw out in the TEST
> mode and is used with a converted NDB 100w transmitter for ERP =
> 4.15w on 495 KHz.
>
>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
> BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
> DUBUS Magazine USA Rep dubususa at gmail.com
> "Kits made by KL7UW" http://www.kl7uw.com/kits.htm
> ======================================
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html