[Elecraft] K3 - Frequency Memory Use

[Dick Dievendorff]

There are some special characteristics of the first 10 memories, depending
on a configuration menu choice.  Could you be running into that issue?

Dick

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Fred Jensen
Sent: Monday, February 06, 2012 12:35 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 - Frequency Memory Use

I loaded some of my frequency memories right after Dick released his K3
Editor for them, and then never used any of them.  With the advent of CW on
60m come 5 Mar, I revisited them, and I think I might be missing something.

Let's say my VFO A is on 3.533.000 and VFO B is somewhere on 75.  I tap 
M>V and get a frequency in VFO A and a mem # and tag in VFO B.  I use
the Big Knob to select the mem # I want and tap M>V again, let's say to NMC
on 8 MHz for Wx FAX.  Works fine.

1.  Now, I'd like to restore the two VFO's to their settings before I did
all the tapping/selecting in the above graf.  Is there a way to recall the
previous VFO settings?  It seems that the VFO A band has become 40m instead
of 80m, and the mode is now USB.

2.  I loaded 51 - 55 with the 60m CW freqs in VFO A and USB freqs in VFO B.
It seems to work ... I think.  Just tap A/B to toggle between CW and USB on
a selected channel.  Anyone see anything wrong with this, it seems simple
enough that I wonder if I'm missing something.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html