[Elecraft] PTT plus VOX -- possible?

[Arie Kleingeld PA3A]

Bob,

The easy way to do it:
Connect audio line-output from N1MM to the line-in (mono) of the K3 and 
set the VOX to on.  Set in the menu mic+lin to ON. This will allow the 
pc and your mic to trigger the vox of the K3.
If you still want to ptt the K3 from N1mm, which is better,  then this 
ptt can be done through the serial cable. I can point you there, but you 
can find this  in the N1MM config set-up. The K3 setting for this is in 
the K3 config under the ptt-key item.

You can also route the your mic through the soundcard, which many people 
do.  I prefer what I've written above because I often use the K3 without 
my computer.

73
Arie PA3A



Op 6-2-2012 1:30, n6wg at comcast.net schreef:
>
> I'm trying to set up my K3 to be keyed by PTT from my laptop for voice contests
>
> to transmit the various canned messages under the N1MM F keys.  I also want
>
> to be able to key with vox when I need to give an exchange by voice, such as
>
> when it includes a serial number that changes with each QSO.
>
> In the menu, I only see PTT or VOX, nothing to indicate both can work at the
>
> same time.
>
>
>
> Any ideas?
>
>
>
> Thanks and 73
>
> Bob N6WG
>
>