[Elecraft] K3 CW filter advice request

[Rick Prather]

I would skip the 1.0 and replace it with either a 200 (if CW is primary)  or either the 1.5 or 1.8 if you do a lot of combat SSB.

Rick
K6LE

On 2/5/2012, at 8:54 , AC6JA at aol.com wrote:

> I have pretty much the same operating style and opted for the following  
> filters in BOTH receivers:
> 
> 2.8khz    
> 1.0khz
> 400hz
> 
> Mike AC6JA
> K3 #3215
> 
> 
> 
> 
> In a message dated 2/4/2012 9:03:53 A.M. Pacific Standard Time,  
> rcrgs at verizon.net writes:
> 
> Well,  I'm in for a K3, and I need to pick some CW filters. I've read all 
> the  threads, checked the graphs, and now would appreciate some 
> experiential  reports/advice. I operate almost exclusively CW, mostly 
> chasing DX,  contests, and some occasional rag chewing. SSB only if no 
> other  choice/challenge. What have folks been using for (1) brick-wall 
> protection  under demanding CW conditions, and (2) looking around and 
> casual chatting?  Data modes aren't a consideration at this point. Thanks 
> much in  advance.
> 
> ...robert
> -- 
> Robert G. Strickland, PhD, ABPH -  KE2WY
> rcrgs at verizon.net
> Syracuse, New York,  USA
> ______________________________________________________________
> Elecraft  mailing list
> Home:  http://mailman.qth.net/mailman/listinfo/elecraft
> Help:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:Elecraft at mailman.qth.net
> 
> This list hosted by:  http://www.qsl.net
> Please help support this email list:  http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html