[Elecraft] Fw: FCC 60m Band Change Rules PublishedInFederalRegister On 03 February 2012 - Correction

[Don Wilhelm]

Jim,

With Elecraft gear, set the VFO frequency to the center channel 
frequency for CW - the note you will hear from the other station should 
be at the setting of your sidetone pitch, and you will transmit at the 
channel center frequency.
Yes, that is different than the suppressed carrier frequency that you 
must use in USB.
CW in SSB is no help here either - the offset is not 1.5 kHz.

73,
Don W3FPR

On 2/4/2012 2:55 PM, Jim Miller KG0KP wrote:
> Sorry, I should have stated the CW signal you are receiving should be
> exactly ON the CENTER frequency of that channel as would be your transmitted
> signal.
>
>