[Elecraft] Use of wireless keyboard with P3/SVGA

[Terry Schieler]

I also use the Logitech 360, Bob, and have had perfect results.  I was not pointed to that model by anyone, just saw it in the local big box store and brought it home.  My P3 loves it too!

Terry, W0FM



-----Original Message-----
From: Bob [mailto:WB4SON at gmail.com] 
Sent: Wednesday, August 29, 2012 12:16 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Use of wireless keyboard with P3/SVGA

At the Boxboro Hamfest, Elecraft was demonstrating a P3/SVGA with the latest Beta firmware.  They were using a wireless keyboard which plugged into the USB connector on the back of the P3 -- it was working flawlessly (including macros that allowed the up/down arrows to change the VFO A frequency in 10Hz steps).  I asked Eric what keyboard he was using at the show and he confirmed it was a Logitech K360, which sells for about $30 including the tiny USB receiver.

In my shack, at least, wires == problems, clutter and RFI.  So anything wireless is a blessing.

This is probably obvious to everyone, but I wanted to share that combination as something known to work.

73, Bob,WB4SON