[Elecraft] rf gain

[Don Wilhelm]

I would discourage one from arbitrarily doing an EEINIT" unless you have 
a stored K3 configuration file that you can load afterward.

EEINIT sets all menu items back to the default settings.  It may be 
necessary, but do know that you will have a lot of calibration to do 
unless you have that configuration file with the settings from a known 
good working time for your K3 (goes for KX3 too).

73,
Don W3FPR
.
On 8/26/2012 7:46 PM, Stan Gibbs wrote:
> Try running the parameter initialization process, following the instructions
> on page 66 of the latest owners manual.  My K3 had this behavior at one time
> and it was corrected by running EE INIT.
>
>