[Elecraft] KX3: No RX - SWR 25 to 1

[Fred Carvalho]

Hi Bc, yes I did. As I mentioned there is no RX at all, even with my main
station on the air , close by to the KX3.
Fred

2012/8/26 Bill Conkling <nr4c at widomaker.com>

> Open it up and check to make sure the BNC connector is plugged into the
> ATU.
> It sounds like the antenna is not connected, you did check this, didn't
> you?
>
> ...bc  nr4c
>
> -----Original Message-----
> From: Fred Carvalho [mailto:fred.py2xb at gmail.com]
> Sent: Sunday, August 26, 2012 5:31 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KX3: No RX - SWR 25 to 1
>
> Hello guys
> Need some help to start with.
>
> I have a KX3 purchased in May. It has the roofing filter and the ATU unit.
> I have not updated the firmware yet. Still with the one loaded in the
> factory.
> Recently the radio went mute. Also when trying to match the antenna with
> the ATU, SWR displayed 25:1.
> It did that sometimes sometimes. Each time it went back to normal.  Then
> went mute definitely.
> I have bypassed the ATU via the Menu, no change.
> I have also verified if when mute it was insensitive, but receiving. No
> receiving at all.
>
> Any ideas to start with ? Thanks
>
> --
> Fred C Carvalho - PY2XB
> T30PY & T30SIX Coming in October
> Support this DXpedition : http://www.mdxc.org/t30py/
> [image: T30PY-3D.png]
>
>
>
>
> --
> Fred C Carvalho - PY2XB
> T30PY & T30SIX Coming in October
> Support this DXpedition : http://www.mdxc.org/t30py/
> [image: T30PY-3D.png]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>


-- 
Fred C Carvalho - PY2XB
T30PY & T30SIX Coming in October
Support this DXpedition : http://www.mdxc.org/t30py/
[image: T30PY-3D.png]