[Elecraft] W2 power reading not functioning

[Bill K9YEQ]

I had this happen to me once.  I reloaded the firmware and that fixed it.
Must've had some stray RF or something that caused the firmware to corrupt.

73,
Bill
K9YEQ


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of goldtr8 at charter.net
Sent: Sunday, August 26, 2012 2:07 PM
To: elecraft list
Subject: [Elecraft] W2 power reading not functioning


HI Guys,

I have a used W2 that has the 2kw transmitter that is not functioning
properly.

I can get it to read out swr on the led's if it is on the 20w range setting.
If I use auto it selects the 20w range and only measures swr.

There is no outputs on the led's for the power other then the 1 led being
lit.

When trying to do a TX as long as I am at 20w or less the swr leds light but
again no power led's light up.

I have tried both the sensor 1 and sensor 2 ports but it does not make a
difference.

I has the 12v power on mod done by the previous owner.

Anyway are there any ideas on what to look for or is this thing going to
have to go to elecraft for repairs.

Thanks
Don

~73
Don
KD8NNU
FH#4107
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html