[Elecraft] [K3] List of Macros

[Dick Dievendorff]

There are some K3 macros in K3 Utility Help for the Command Tester page,
enough to get some ideas and to get started.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of iain macdonnell -
N6ML
Sent: Wednesday, August 22, 2012 2:20 PM
To: Mike K2MK
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] [K3] List of Macros

Hi Mike,

Roy's asking about K3 macros, as described on pages 5 and 6 of the "K3 and
KX3 Programmer's Reference".

I don't know that there's a "definitive" list anywhere, but Google found
some, including:

http://www.ke7x.com/home/k3-macro-repository
http://gm0elp.blogspot.com/2010/03/elecraft-k3-macros.html

Seems like this would be a really good application for a wiki, but I think
the Elecraft wiki that was around a few years ago died off ...
(?)

73,

    ~iain / N6ML




On Wed, Aug 22, 2012 at 6:23 AM, Mike K2MK <k2mk at comcast.net> wrote:
> Hi Roy,
>
> Here is how I understand the ability to send macros from a PC. Perhaps 
> others can add to or correct my response. In order to send a macro 
> from your PC to the K3 and P3 you will need to be running a program 
> that is already communicating with the K3 over a serial channel. You 
> didn't mention how your are operating PSK and RTTY. Are you using a PC 
> program or are you using the internal capabilities of the K3? If the 
> latter and if you have the SVGA board in your P3 and have an external 
> monitor and keyboard attached then I believe that capability is 
> already available to you using the F keys on the external keyboard.
>
> Back to the PC. If you are running a program for PSK and RTTY then it 
> would have to have the capability to send macros built into it. For 
> example WriteLog and N1MM have that ability. I use WriteLog for CW and 
> RTTY and I have macros set up on the F12 button and the multiply 
> (asterisk) button of my PC keyboard. The F12 button activates the K3 
> auto spotting feature for CW and also centers the signal on the P3 
> screen when the P3 is in the Fixed Tune mode. The multiply (asterisk) 
> button toggles the APF function when in CW and toggles the dual passband
function when in RTTY.
>
> 73,
> Mike K2MK
>
>
>
> Roy Morris-6 wrote
>>
>>>From time to time I have seen some macros for shortcuts to various K3
>> functions.  At the time I did not pay enough attention and did not 
>> copy them down.  I wonder if there is a comprehensive list somewhere 
>> for the K3 macros and also a list for macros used by the P3 in the 
>> data modes.  I would like to assign some standard macro information 
>> to the F keys on the keyboard while in PSK31 and RTTY modes.  Thanks 
>> for any help.  Roy  W4WFB
>>
>
>
>
>
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/K3-List-of-Macros-tp7561438p75614
> 64.html Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html