[Elecraft] KX3 - Pandapter woes

[Lyle Johnson]

Buck,

Time to isolate.

Connect up the KX3 2.5 mm jack to the EMU-0202 as normal.

Instead of running NaP3, run an application that lets you see or hear 
each channel of the EMU-0202. Maybe one of the apps that was bundled 
with the EMU, or maybe one of the many sound editor programs.  Maybe 
NaP3 lets you do this, I don't know.  The whole idea is to see which 
channel of the EMU is getting audio fromthe KX3.

Now, swap the cables at the EMU-0202.  Since this uses a pair of 6.5 mm 
mono jacks, they are easy to swap.  See if the prtoblem moves to the 
other channel.  If so, verify the cable with an ohmmeter -- the problem 
is the cable or the KX3.  If not, the problem is the EMU-0202.

Finally, if it is the cable or the KX3, do the usual jiggling of the 
cable, etc. to see if it is just poor contact or ?

Hope this helps, sorry for the problem you are having.

73,

Lyle KK7P

> I am having a devil of a time with my KX3 and NaP3 running through an
> EM0202 outboard soundcard.  It works great with my K3 to an LpPan
> pandapter.
>
> With the KX3, I get a big blip in the middle and mirror images on either
> side that move along with the tuning.  I have tried reversing the I/Q.
> This is telling me there is something wrong with the cables but I have
> switched them out, including the 2.5>3.5 adapter to no avail.  Now, I am
> suspecting the I/Q jack on the KX3 but that seem unlikely.
>
> Anyone have an idea for me to try?
>