[Elecraft] KX3 "DE-Xpedition" - K2N
Wayne Burdick
n6kr at elecraft.com
Fri Aug 17 11:47:27 EDT 2012
Sounds like fun, Stan.
Hopefully you won't have the three stations right on top of each
other. But if you do, you'll want to keep the following menu entries
in mind:
- If you have two or more radios on the same band, set RX ISO to ON.
This will prevent them from hearing each other's VFO signals in
receive mode. This setting defaults to OFF since it adds about 10-15
mA to receive current drain.
- RX SHFT can be set to 8.0, if needed, to reduce or eliminate any
mutual interference during transmit. Most SDR-architecture receivers
have the equivalent of RX SHFT turned on at all times, partly for this
reason. But it defaults to no shift (NOR) in the KX3 to allow the use
of dual watch and roofing filters. RX SHFT is a per-band setting; you
might need it only on one band, or not at all.
- If keying one rig activates the carrier-operated-relay (COR) of the
other(s), you can optionally move their COR threshold up (MENU:COR
LVL). The default is 0.1 watts. I wouldn't move it too much higher
than this.
The KX3 takes other automatic protective steps as required. This
includes temporary reduction of I.F. gain, and turning off the preamp.
73,
Wayne
N6KR
On Aug 17, 2012, at 8:04 AM, stan levandowski wrote:
> We'll be taking three KX3s aboard the last surviving destroyer
> escort in
> the world {USS SLATER (DE-766)} that has been returned to its original
> 1945 wartime condition. The date and time is September 19th from
> 1600Z
> to 2400Z. The geographic location is the Port of Albany, NY, on the
> Hudson River. We'll be operating QRP CW on or around 7031 KHz, 14061
> KHz, and 18097 KHz. We'll be operating from the LOPs ("Local Operating
> Positions") in Radio Central. We'll be utilizing the authentically
> restored shipboard verticals (70' and 80') and horizontal wires (100'
> and 190'). There is a detailed entry for K2N at qrzed dot com
> including
> QSL info. There is insufficient lead time for publication in QST or
> CQ.
> So anyone with interest please mark your calendar.
> 73, Stan WB2LQF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list