[Elecraft] How's the RIT work?

[Don Wilhelm]

I assume the K3 rather than the KX3.

Simply tapping the RIT button should be sufficient to turn on RIT. 
Initially the green LED will light (indicating zero offset), and then as 
you rotate the RIT/XIT knob, one or the other of the yellow LEDs will 
light indicating negative RIT offset or positive offset. The amount of 
offset is indicated briefly in the VFO B area.

73,
Don W3FPR

On 8/16/2012 10:47 PM, Dr. William J. Schmidt, II wrote:
> SO I'm down on J6 without the manual and don't know how to make the RIT
> (right bottom control) come to life. what's the secret (menu setting?)..
>
>   
>
>   
>
> Dr. William J. Schmidt - K9HZ / J68HZ/ 8P6HK/ ZF2HZ/ pj4hz
>
>   
>
> Owner - Operator
>
> Big Signal Ranch
>
> Staunton, Illinois
>
>   
>
> email:   <mailto:bill at wjschmidt.com> bill at wjschmidt.com
>
>   
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>