[Elecraft] CW Decode

[Bill Conkling]

I for one hope they will offer an option to blank the vfo B freq display  
except when tuning.

...bill nr4c 

Sent from my Verizon Wireless Droid

-----Original message-----
From: Brian Hunt <huntinhmb at coastside.net>
To: elecraft at mailman.qth.net
Sent: Wed, Aug 15, 2012 02:40:42 GMT+00:00
Subject: Re: [Elecraft] CW Decode

With FW 4.51 installed the CW decode has become problematic.  I think 
Wayne mentioned that it was primarily an AGC issue.  With this in mind 
I've been able to get it to do almost perfect copy of the W1AW slow 
speed code practice tonight. My technique is to set the Threshold to 
Auto (HOLD CWT}, carefully tune in the signal to be copied using the CWT 
marker and then back down on the RF gain until the characters begin to 
appear.  You might have to ride the RF gain control to get consistent copy.

I don't know of any way to lock the VFO-B display into "text" mode.

Hope this helps ...

Brian, K0DTJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html