[Elecraft] K3 Mics - ( Heil GM5)

[John W. Tipka]

I am using either a Heil GM4 or GM5 mic plugged into the K3 rear jack
through a Microham Microkeyer with DB37-EL-K3R  cable. The
Microkeyer cable mates with the Heil GM4 and GM5 Kenwood cable
with no modifications. Both mics are high impedance.

However, with just the Heil Kenwood cable, the GM5 works fine in
the front panel connector.

My setup:
Rear:
CONFIG  rP.H -  with MIC Gain 29  VOX Gain 21 AntiVox 14
or
Front panel:
CONFIG - FP.H with exact same settings as above.

John W8UL