[Elecraft] Transferring Configuration to another K3

[Matt Maguire]

Don't forget that the configuration will contain calibration settings that are specific to the hardware on a particular radio -- if you try to transfer them to a different radio, they will not be valid for the new hardware, and you'll need to repeat the alignment procedures. I am guessing that this is why a copy operation is not allowed.

73, Matt VK2ACL.


On 13/08/2012, at 7:49 PM, Richard Squire - HB9ANM <hb9anm at bluewin.ch> wrote:

> Trying to transfer my configuration to my second K3, K3 Utility taught me
> this was not possible because serial numbers were not consistent... After
> four years using the K3, I still have a lot to learn :-)
> 
> So I copied all the menus and Configs one by one, this took nearly an hour
> but my two K3's now have identical settings.
> 
> I wonder whether anyone has found a way to "cheat" on the Utility to make it
> believe it's the same transceiver? Or what is the reason why this apparently
> is not allowed?
> 
> I'm just curious...
> 
> 73
> Richard - HB9ANM
> 
> 
> 
> 
> -----
> Richard - HB9ANM
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Transferring-Configuration-to-another-K3-tp7560979.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html