[Elecraft] Mic Gain Help Needed

[Howard Stephenson]

Don,
It's a typo in the manual.
Tap 7 to turn on the additional gain stage for the front-panel mic.

-- 
------
73's  Howard Stephenson  K6IA
Customer Support
------


> MIC SEL  command question
>
> According to the manual I should be able to turn on and off the
> additional gain setting by tapping the "3" key.  It no longer appears to
> work as I get N/A on the display.
>
> Is this no longer working with the production release of software?
>
> I need to try and lower the gain and I think its on the high position
> for the additional gain stage.
>
> Manual info below.
>
> Mic/line transmit audio source, mic gain range, and mic bias. Source
> selections:
> FP (front panel 8-pin MIC jack), RP (rear panel 3.5 mm MIC jack), and
> LINE IN
> (rear-panel LINE IN jack). Tap 1 to toggle between .Low and .High mic
> gain range
> for the selected mic. Tap 2 to turn mic BIAS on/off (turn on for
> electret mics).
> For the front-panel mic only, tap 3 to turn on an additional gain stage.
> Use this only
> with very low-output mics. An apostrophe will appear after the H, e.g.
> H’ .
>
> ~73
> Don
> KD8NNU

-- 
------
73's  Howard Stephenson  K6IA
Customer Support
------