[Elecraft] KX1 Battery Pack Connection Broke

[Don Wilhelm]

Matt,

I would cut the black wire off at the same point, then order 2 of the 
crimp pins and if you cannot get the old pins out of the housing, order 
a new housing too.

See the KX1 manual for assembly of the housing.

It makes no sense to me to replace the entire battery pack, you would 
just have to assemble it even with all new parts.

73,
Don W3FPR

On 8/8/2012 8:06 PM, Matt Hancock wrote:
> Hi there,
>
> I recently purchased a slightly used KX1.
>
> Went to use it in the field last week, and as I was popping in
> batteries to the internal pack, the red wire broke at the point at
> which it it is soldered to the little whit clip that connects to the
> transceiver.
>
> Can I easily replace the battery pack with a new one?
>
> 73,
>
> Matt, AC9BQ
>
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>