[Elecraft] K3 TX power drifts upwards.

[Mike K2MK]

Hi Roger,

You should probably redo the TX Gain calibration from the K3 Utility. If the
problem remains only on one or two bands you may want to manually fiddle
with the setting per the notes at the top of page 62 of the manual. If the
problem remains on all bands there is probably some other cause.

73,
Mike K2MK



reliant325 wrote
> 
> I recently acquired a K3 which I decided to try on WSPR.
> I have been active on WSPR for many months now. I setup the K3 with the
> same interface and PC as I use with my IC7700.
> The setup with the K3 was straightforward and worked well.....however.....
> 
> I set my TX power to 1 watt and during the TX cycle the power slowly
> creeps up to about 2 watts.
> When the next TX cycle comes around, its back to 1 watt and then creeps
> upward again.
> Anyone else experienced this?
> 
> Roger G0IUW
> 




--
View this message in context: http://elecraft.365791.n2.nabble.com/TX-power-drifts-upwards-tp7560567p7560569.html
Sent from the Elecraft mailing list archive at Nabble.com.