[Elecraft] Menu parameters via macro

[Dick Dievendorff]

MP is generally much lower. Try MN115; in the command tester, then MP; in the command tester, observe the MPxxx; response, change the menu item with the radio, then enter MP; in the command tester, observe the response.   I use this technique to correlate MP values with menu parameters. Use the MPxxx; values in your setters. MP115; is too high.

Dick, K6KR

Sent from my iPad

On Aug 7, 2012, at 5:18 AM, W4ATK <w4atk at bellsouth.net> wrote:

>    I have had no success at accessing menu parameters via MNxxx, MPxxx, and/or MQxxx commands.
> 
>    The book sez:  "MN acceses menu entries. MP can then be used (in some cases) to read or set the parameter value. Based on this I should be able to do the following:
> 
>    MN115;  (enter the menu)
>    MP115;  (acquire or set the value)
>    MN255;  (exit the menu)
> 
>    So far, nothing.....
> 
>    JIm, W4ATK
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html