[Elecraft] [KX3] NR setting

[JP O'Connor]

Hello Pierre,

If I recall correctly, the NR function was implemented in a later version
of the firmware. The user manual errata document from April noted some
features that weren't yet implemented.

However, I think you will find NR works now in the current firmware
version. Upgrading is very quick and easy. Also, documents and firmware
revision notes are available on the Elecraft web site.

If I am incorrect in any of the above, or if you have additional problems
or questions, I'm sure other folks here will get you going!


Thanks,
JP

73 de WF4Z

On Fri, Aug 3, 2012 at 10:48 PM, Pierre <ve2pid at videotron.ca> wrote:

> .. On page 13 of the KX3 manual, we can read this:
>
> Holding NR turns on noise reduction and displays its setting, which can be
> adjusted using the knob above the switch. Tap any switch to exit the
> setting
> display.
>
> I have installed the NR but cannot adjust its setting using the control
> knob
> above the switch. Am I missing something?
>
> Thanks de VE2PID KX3 # 190
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/KX3-NR-setting-tp7560275.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>