[Elecraft] K3: Sub receiver question

[Oliver Dröse]

Hi David,

in standard configuration you can only use one transverter at a time, no 
matter if internal or external (the internal K144XV is switched from the 
same XV3A board as the external transverters).

73, Olli - DH8BQA



----- Original Message ----- 
From: "David Pratt" <david at g4dmp.fsnet.co.uk>
To: <elecraft at mailman.qth.net>
Sent: Monday, August 06, 2012 3:35 PM
Subject: [Elecraft] K3: Sub receiver question


>I am using the internal K144XV 2-metre transverter at VFO B and an
> external XV50 (modified for 4 metres) at VFO A.
>
> Switching in the SUB I can hear VFO A (4 metres) okay but, although I
> can hear the K144XV noise level when advancing the SUB RF & AF gain
> controls, I do not hear any signals. I do have a 2 metre antenna in the
> ANT3 socket.
>
> Am I doing something wrong ?  I would have expected to be able to
> receive 2 metres and 4 metres at the same time.
>
> David G4DMP
>
> -- 
> + - - - - - - - - - - - - - - - - +
> | David M Pratt, Kippax, Leeds.   |
> | Website: http://www.g4dmp.co.uk |
> + - - - - - - - - - - - - - - - - +
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> E-Mail ist virenfrei.
> Von AVG uberpruft - www.avg.de
> Version: 2012.0.2197 / Virendatenbank: 2437/5179 - Ausgabedatum: 
> 05.08.2012
>