[Elecraft] P3/SVGA BETA 1.18/1.07 Now available for download

[hawley, charles j jr]

Thanks for the info and instructions. Loaded  perfectly.

Chuck, KE9UW
aka Jack, BMW Motorcycles BMWMOA #224

________________________________________
From: elecraft-bounces at mailman.qth.net [elecraft-bounces at mailman.qth.net] on behalf of Paul Saffren N6HZ [pauls at elecraft.com]
Sent: Friday, August 03, 2012 5:16 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] P3/SVGA BETA 1.18/1.07 Now available for download

*IMPORTANT:  PLEASE MAKE SURE DATA DISPLAY MODE IS DISABLED BEFORE ATTEMPTING
TO UPGRADE THE FIRMWARE* (only if you installed the previous beta)

P3SVGA_0118BETA.zip has been placed in the Elecraft P3 Beta firmware
directory:  ftp://ftp.elecraft.com/P3/firmware/beta/
ftp://ftp.elecraft.com/P3/firmware/beta/

Here are the release notes for this build:   /(for instructions on how to
use data display mode, refer to the included file: DataQuickStart.pdf)/

*P3SVGA 01.07 / 08-01-2012*

* Fixed a bug where the data windows would not re-size correctly and caused
the video to show vertical bars over entire screen.
* Un-initialized macros now show as <empty> instead of all dashes.
* Typing the vertical bar ‘|’ or embedding it in a text message reverts the
K3 to receive immediately.
* Pressing Ctrl-F while entering a macro definition inserts the current VFO
frequency including RIT, into the macro using the FA format, i.e.
FA0007020000;
* All of the numeric keypad keys can now be used for macros/text messages.
* Tx timeout now works in when CR is used to send Tx text.  The K3 will
remain in Tx during the timeout and text can be entered and sent
immediately.
* Timeout can now be set from 0 – 90,000 ms (0 – 90 seconds)
* Fixed span adjustment so that it now shows correct 500 Hz steps when span
is below 10 KHz.
* The second LED on the SVGA board now lights when a keyboard is attached
and is off when keyboard is removed.



*MCU 01.18/ 8-1-2012*

* The SVGA data mode on/off state is now stored in EEPROM.
* Fixed a bug where the VFO B cursor would not change color when SPLIT was
selected on the K3 while the SVGA data mode was enabled.


*P3SVGA 01.05 / 7-20-2012*

* Data display mode added for external monitor.
* USB keyboard support added.
* Video resolutions 1024x768, 1280x1024 and 1920x1080 now use a PLL
generated clock making them more compatible with a variety of monitors.


*MCU 01.17 / 7-20-2012*

* Supports SVGA data mode, including new SVGA menu entries:  "SVGA data"
on/off, "SVGA fntD" (data display font), "SVGA WinR" (receive window size),
and "SVGA WinT" (transmit window size).




--
Paul Saffren - n6hz
Firmware Engineer
Elecraft Inc.
831.763.4211
www.elecraft.com



--
View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-BETA-1-18-1-07-Now-available-for-download-tp7560259.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html