[Elecraft] K3 Phones / Diversity Question
Scott Manthe
scott.manthe at gmail.com
Fri Aug 3 13:24:46 EDT 2012
Do you have a separate receiver antenna connected to the KRX3? If so, is
the KRX3 configured properly to use it?
73,
Scott, N9AA
On 8/3/12 1:16 PM, Jim Bennett wrote:
> Still have issues with this. Here are the settings in Config that I'm assuming are relevant:
>
> L-Mix-R = A b
> SPKRS = 1
> SPKR + Ph = no
> SQ Main = Sub Pot
> SQ Sub = Sub Pot
> Sub AF = Nor
>
> With these Config settings, the K3 works fine with the SubRX turned off; equal Main audio in both headphones. When I turn on the SubRX, it is still OK; I get Main audio in the left ear and Sub audio in the right ear. I know I'm getting the Sub audio in the right ear, as I can turn the sub VFO and hear the frequency change in my right ear. BUT, as soon as I turn on Diversity, I get almost no signal in the right ear. It isn't silent - it's just that the signal that is pounding in on the Main is nearly inaudible on the Sub. If the signal being received on the Main is less than S7, I can't even hear it on the Sub with Diversity turned on. If it is an S9 or greater signal, then I can just barely hear it on the Sub when Diversity is turned on.
>
> Very strange. The SubRX works fine until Diversity mode is enabled.
>
> Any ideas? Does this need to be escalated to Elecraft Tech Support?
>
>
>
More information about the Elecraft
mailing list