[Elecraft] K3 Phones / Diversity Question

[Jack Berry]

Jim,
you can adjust the volumes independently on the front panel. But you probably knew that. 
Seems also that there is a config setting that needs to be adjusted for the volume ratio to work correctly - page 37 of the manual. 

On Aug 2, 2012, at 10:56 PM, Jim Bennett <w6jhb at mac.com> wrote:

> I just recently added the sub receiver to my K3. I've been using the Sub receiver (without diversity turned on) and all was fine. I have the Yamaha CM500 headset - one cable plugged into the Phones jack and the other going to the Mic jack. I also have an Icom SP-20 external speaker, and it's connected to the Spkrs jack. 
> 
> Well, I engaged Diversity mode and at first thought it was working properly. But, when I turned the AF to zero on the Main receiver, I realized that the audio on the Sub was almost nonexistent signals are there, but really, really weak. OK, so looking at the Config parameters, I noticed in the KRX3 manual that SPKRS should be set to 1. Mine was set to 2. I changed it to one and now have zero audio coming from the Sub receiver. Not exactly what I was hoping for.
> 
> What do I need to do to get my headphone audio in Diversity mode to act as it does with the Sub turned on, but Diversity off? 
> 
> Confused, I am.
> 
> Jim / W6JHB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html