[Elecraft] P3/SVGA Keyboard

[Don Wilhelm]

With indoor antennas, I would not want to be in the high RF level 
present with 500 watts.  You may be OK, but I would "run the numbers" 
for the RF exposure limits present at 500 watts given the close 
proximity to your antennas.

73,
Don, W3FPR

On 8/2/2012 9:32 AM, W4ATK wrote:
> Well, I guess I was just reading into it a version of my wish list Don. I am currently using a Logitech K120 from Staples. $15.95 and two RS Ferrites. Seems to work OK at 100W. I tested on all bands 80 thru 10 this AM and it checked out clean.  But there is a KPA500 in  my future I am thinkin'.
>
> 73s Jim, W4ATK
> On Aug 2, 2012, at 8:12 AM, Don Wilhelm wrote:
>
>> Jim,
>>
>> My understanding is that the USB option for the SVGA board is that it will *accept* a PC USB keyboard.  I have never heard that Elecraft would be selling a keyboard.
>>
>> 73,
>> Don W3FPR
>>
>> On 8/2/2012 9:07 AM, W4ATK wrote:
>>> Maybe I am mistaken but I think I heard of a USB Keyboard option for the SVGA/FFT board coming from Elecraft..... I use all indoor antennas so RFi is pretty much a constant struggle with interconnect cabling like keyboards. Ferrites everywhere. I try to go wireless where I can. Heaven knows what I would be up against if I had a
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>