[Elecraft] P3 hookup

[Don Wilhelm]

Mike,

Make it simple - put the "Y" cable at the P3 -- The short cable that 
comes with the P3 connects between the P3 and the K3.
Set the baud rate at the P3, computer and SteppIR controller to the same 
value.
Job done.

73,
Don W3FPR

On 8/2/2012 4:27 AM, Mike wrote:
> OK, Mike. I did re-read it and I still am not sure what you mean. The
> phrase that's throwing me is
>
> "leg of the Y cable that goes to the K3 as the Elecraft leg"
>
>
>