[Elecraft] KX3 KXAT3 SWR re-tune request threshold

[Don Wilhelm]

Pierre,

When you "bypass" the tuner, it is taken out of the circuit (well 
almost) - sort of like no tuner at all.

You would only want to set the tuner to bypass if you have resonant 
antennas or you are working into a dummy load.

73,
Don W3FPR

On 8/1/2012 8:00 PM, Pierre wrote:
> Hi Stan,
>
> What I often do is to make very frequent band change so I would have to
> repeat each time the bypass/debypass process... I would prefer to have a
> higher threshold for all bands.
>