[Elecraft] P3 Firmware 1.16 and SVGA 1.04 now available

Sat Apr 28 11:10:38 EDT 2012

Hi All,
     I am having some difficultly in updating my P3 firmware.    P3 Utility
1.12.4.26 is installed but when I check for new Firmware Available I am told
they are: 
MCU	01.13
SVGA 01.02
FPGA0 01.02
FPGA1 01.02
FPGA2 01.02
FPGA3 01.02
FPGA4 01.02
And that these are already installed.    Should not the latest P3 utility
automatically tell me of updates available and then allow me to install
them.    Any on e have a suggestion?   Thank you.

             73 Doug EI2CN   
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Paul Saffren N6HZ
Sent: 27 April 2012 23:21
To: elecraft at mailman.qth.net
Subject: [Elecraft] P3 Firmware 1.16 and SVGA 1.04 now available

P3 Version 1.16, SVGA version 1.04 and P3 Utility version 1.12.4.26 are all
now available from the Elecraft website.   We are suggesting that users
update their P3 Utility to the latest version. 

P3 Utility is available at:
http://www.elecraft.com/software/P3/P3_Utility_Setup_1_12_4_26.exe
P3 1.16 and SVGA 1.04:
http://www.elecraft.com/software/elecraft_software_page.htm

MCU 01.16 / 4-27-2012

.	Faster P3 Utility response when no SVGA board is installed
.	Added the menu selection, "MENU : SVGA menu : SVGA FW" to display
the
revision numbers of SVGA firmware and FPGA images.
.	Disabling the SVGA now blanks the external display.
.	The external display waterfall color bias is initialized properly at
power-up.
.	The AVERAGE and MKRA/B parameter adjustment text on the external
display
is removed when the adjustment is exited on the P3.
.	The "VFB" RS-232 command now works with the SVGA display.
.	MKR A and MKR B adjustment text on the external display is still on
after
changing SVGA resolution and after the un-QSY function.
.	The waterfall height adjustment on the external display is
terminated when
pressing a toggle key on the P3.
.	The display frequency is correct when K3 RIT is on after switching
from
tracking to fixed-tune mode.
.	Fixed an intermittent bug in the "#QSY" RS-232 command.
.	VFO B cursor displays correctly when VFO B is on a different band.
.	The auto-baud of the K3 RS-232 port works again.  (It broke in
version
1.06.)

P3SVGA 01.04 / 4-20-2012

.	Added U-shaped bracket style cursors. 
.	Added 4 optional fonts which can be selected within the P3 SVGA
menu. 
.	Numerous screen bug-lets fixed such as thicker separation line
between
waterfall and spectrum, removed dark space on right of waterfall, removed
hanging marker frequency lines, disappearing marker highlight when filter
width was narrow, window formatting etc.
.	Added monochrome waterfall color table. 
.	Spectrum trace no longer resets (sags) when VFO A or B is tuned in
fixed
tune mode.
.	Added waterfall color bias, available in P3 SVGA menu.
.	Top and bottom tick marks now move when tuning VFO A in tracking
mode. 
.	Spectrum/Waterfall screen update speed increased slightly. 
.	Vertical white line center frequency added when in tracking mode. 
.	Transmit cursor now displays 'under' VFO A cursor. 
.	Trace averaging now resets using un-averaged data instead of zero. 
.	Fixed RIT bug where RIT was not being displayed correctly. 
.	Fixed I/Q sync bug that caused high noise to display on spectrum
when span
changed.
.	Fixed jumping 200 Hz VFO A/B cursors in fixed tune mode. 

Known Issues: 
1) When CenterEn is enabled on the P3 in tracking mode and the center
frequency is changed, the SVGA frequency does not stay in sync.  This will
be addressed in a future release. 

2) Several users have seen what appears to be flickering in the waterfall
display.  This is not a bug - Its the normal optical result of scrolling
discrete pixelated data and noise up one line at a time across the whole
waterfall.  It happens on the smaller P3 screen too, but it is not as
evident to your eye due to the smaller size.  The effect can be minimized by
setting averaging to 2 and then enabling waterfall averaging. 

3) 1920x1080 resolution does not correctly sync horizontally on some
monitors.  We are aware of this problem and are seeking a solution.  In the
meantime we suggest using 1440x900 resolution. 

73, 

Paul

--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Firmware-1-16-and-SVGA-1-04-now-avai
lable-tp7507590.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html