[Elecraft] solder iron correct temp in C for K3
Gary K9GS
garyk9gs at wi.rr.com
Fri Apr 27 00:32:29 EDT 2012
Or, in google just type something like: 750F to C
Works for all kinds of different units of measure.
On 4/26/2012 10:59 PM, Don Wilhelm wrote:
> Actually, the conversion is easier to remember than those two formulas.
> The two scales coincide at -40 degrees.
> So for the conversion (either way) first add 40.
> Then if the conversion is from Centigrade to Fahrenheit multiply by 9/5
> (you will be going to a greater number), but if the conversion is from
> Fahrenheit to Celcius, multiply by 5/9 (because the result will be a
> smaller number). Finally, subtract 40 to get your result.
>
> The skeptical may try several passes with their remembering when to add
> or subtract 32 degrees, but this formula always works.
>
> 73,
> Don W3FPR
>
> On 4/26/2012 10:10 PM, Fred Jensen wrote:
>> On 4/26/2012 4:26 PM, W9HAK wrote:
>>> I have a new solder iron that is temperature controlled in degrees
>>> C. What temp should I set the iron for work on the K3? I am using
>>> 60/40 rosin core, small diameter solder. While using solder wick to
>>> clean out the holes from the 12 dc mod kit I used 300c and dipped the
>>> wick in solder flux. I pulled the solder wick across the land when
>>> the solder was liquid, it cleaned the holes on the first pass.
>> F = 32 + (9 * C) / 5
>> C = [(F-32) * 5] / 9
>>
>> 73,
>>
>> Fred K6DGW
>> - Northern California Contest Club
>> - CU in the 2012 Cal QSO Party 6-7 Oct 2012
>> - www.cqp.org
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
73,
Gary K9GS
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org
************************************************
More information about the Elecraft
mailing list