[Elecraft] MAC KX3 utility

[Dick Dievendorff]

Try clicking the "Copy files from Elecraft" button to get the "missing"
files from the Elecraft file server.
There may be a troubleshooting section in Help on "Missing" files.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Robert Galambos
Sent: Wednesday, April 25, 2012 3:28 PM
To: dflem at yahoo.com
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] MAC KX3 utility



got it to work BUT now, even when i clicked on 'versions now' (firmware 
tab) the 'available' stats is 'missing'


and yes, i do have connectivity and no firewall



check for new


On 12-04-25 12:23 AM, David Fleming wrote:
> Also, if Fusion is still running, you will need to disconnect the
USB/Serial adapter from the Windows virtual session. Else, OS X will not see
it.
>
> David, W4SMT
>
> --- On Wed, 4/25/12, David Fleming<dflem at yahoo.com>  wrote:
>
>> From: David Fleming<dflem at yahoo.com>
>> Subject: Re: [Elecraft] MAC KX3 utility
>> To: "Elecraft reflector"<elecraft at mailman.qth.net>
>> Cc: va3bxg at gmail.com
>> Date: Wednesday, April 25, 2012, 12:08 AM
>> Robert,
>>
>> If you are seeing only the bluetooth ports, then the
>> USB/Serial driver is either too old or not installed
>> properly on Snow Leopard. What type of USB/Serial adapter
>> are you using? If it is a Prolific based device, you will
>> need to install the most current driver. This one:
>>
>> http://w4smt.com/KX3/md_PL2303_MacOSX10.6_dmg_v1.4.0.zip
>>
>> If it is a FTDI based device, install this one:
>>
>> http://w4smt.com/KX3/FTDIUSBSerialDriver_v2_2_17.dmg
>>
>> This should solve the problem.
>>
>> David, W4SMT
>>
>>
>> --- On Tue, 4/24/12, Robert Galambos<va3bxg at gmail.com>
>> wrote:
>>
>>> From: Robert Galambos<va3bxg at gmail.com>
>>> Subject: [Elecraft] MAC KX3 utility
>>> To: elecraft at mailman.qth.net
>>> Date: Tuesday, April 24, 2012, 11:52 PM
>>> tried the mac version of the KX3
>>> utility. it did not work
>>>
>>> and here is the senerio.
>>>
>>> i have fusion. running windows 7 i have no problem
>>> connecting to the
>>> utility. it recognizes the USB driver ( in my case
>> COM3)
>>> update firmware
>>> etc works
>>>
>>> so now after installing the USB driver on the mac side,
>> the
>>> error
>>> message comes back KX3 not responding when i test the
>>> connection.
>>>
>>> in this case i only have two Bluetooth port options
>> aand
>>> niether work.
>>>
>>> running snow leopard
>>>
>>>
>>>
>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html