[Elecraft] K1 Stand Screw Size

[Rick Lloyd]

Thanks for the replies,

The K1 manual doesn't mention the side bolt, as I could tell.

But I was sure someone had a KST2 manual.

I'm good to go, now.

Regards,

Rick
AA4W

-----Original Message----- 
From: Don Wilhelm
Sent: Wednesday, April 25, 2012 09:01
To: Rick Lloyd
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K1 Stand Screw Size

Rick,

According to the KTS1 manual, it is 10-32.
Both the diameter, and the thread pitch must match.  Common hardware at
the DIY store may be 10-24.

73,
Don W3FPR

On 4/25/2012 8:50 AM, Rick Lloyd wrote:
> Hello all,
>
> I have a K1 and I’m building a bracket to tilt the rig on my desk.
>
> I am having trouble figuring out the size of the screw for the side of the 
> radio.
>
> I’m thinking it’s a #8 but it starts tight and I’m afraid to force it.
>
> Anyone know the proper screw?
>
> Thanks,