[Elecraft] New KAT500 pics from the Visalia DX convention

[Dick Dievendorff]

Yes, the connections are as you've suggested.
The KAT500 has access to the K3's band change lines, AUXBUS, and can
interrupt the KPA500 PTT key line with just that one cable.

I have that same "too busy" ACC connector problem with antenna & bandpass
filter switching, amp, PR-6, and PTT/FSK connection to a microHAM device.
I'm using a couple of layers of Y connector, dislike the solution, and I
have ideas to resolve that problem somehow. 

Unfortunately I have more ideas than time to implement them.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of N2BC
Sent: Tuesday, April 24, 2012 2:43 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] New KAT500 pics from the Visalia DX convention

I see a couple 15-pin HD connectors,  "XCVR" and "AMP".   

I have a pretty well stuffed plug on the K3 ACC socket now (RTTY interface /
KRC2 / PR6 / KPA500).  Does the K3 to KPA500 cable simply go to the KAT500,
then a jumper from the KAT to the KPA ??

THX!

73, Bill   N2BC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html