[Elecraft] Keypad for frequency entry

[Gary Hinson]

Hi Bill.

Using Logger32 (and probably others - I'm pretty sure N1MM does this too), I
just type the frequency into the callsign entry field, hit return, and the
rig QSYs instantly.  Easier,  more accessible, and less fiddly  than the K3
front panel 'freq ent' malarkey, and one less gadget on the desk since I
need a PC keyboard regardless.   Handy when someone suggests "QSY ten - try
28035?".

73,
Gary  ZL2iFB

www.G4iFB.com 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Bill
> Sent: Tuesday, 24 April 2012 8:46 a.m.
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Keypad for frequency entry
> 
> Over the years, I have used several rigs that offered keypad frequency
entry
> - NOT from the front panel. Rather, from a third party keypad.
> 
> Any such available for the K3?
> 
> My mind is sharp enough to remember the frequencies I wish to use - just
> not educated sufficiently to design my own keypad system/device.
> 
> Bill W2BLC
> --
> IN GOD I TRUST (but, NOT a single politician)
> __________________________________________________________
> ____
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html