[Elecraft] K3 control with HRD

[Ian Kahn - Ham]

Steve,

If you are not running digital modes, you shouldn't need any other 
cables.  If you are running digital modes (PSK, RTTY, OLIVIA, etc.) you 
will need either a sound card interface between the K3 and the computer, 
which will require its own cabling, or cables to connect the Line In and 
Line Out on the K3 to the Line Out and Line In, respectively, on the 
computer sound card.

Hope this helps.

73,

--Ian

Ian Kahn, KM4IK
Roswell, GA  EM74ua
km4ik.ian at gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team


On 4/23/2012 3:31 PM, Steve wrote:
> Greetings,  I'd like to use Ham Radio Deluxe 5.11
> to control and do logging with my
> Elecraft K3.  I have the KUSB cable from
> Elecraft.  Is this the only cable I need to have
> my computer take control of the K3 using HRD?
> Thanks es VY73'
> Steve W8CRH
> SEMPER FI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html