[Elecraft] K2 intermittent problem

[Igor Sokolov]

Did it with well aligned and checked K3 in CW mode plus external frequency 
counter.
Transmit on K2, receive on K3 tuned to the same pitch as set in the menu. 
Then TX on the K3 RX on K2. TX frequency in both cases checked by the 
external counter.

73, Igor UA9CDC

> Igor,
>
> What mode?  How are you determining that the TX and RX frequencies are 
> different?
> There should be no difference in SSB, and in CW the difference should be 
> equal to the sidetone pitch.
>
>  73,
> Don W3FPR
>
>
> On 4/23/2012 1:23 PM, Igor Sokolov wrote:
>> The problem was finally tracked down to X3,X4 crystals. Changing one of 
>> them
>> (only one was found in a local shop) cured the intermittent frequency
>> change. BFO frequency range is within the accepted limits (a bit more 
>> then
>> 3.6 kHz). VFO linearization and CAL FIL is done. Now I have  another
>> problem. TX and RX frequencies do not coincide. The difference is band
>> dependant. It is 30Hz on 80m and 260Hz on 28 MHz. Although the radio is
>> usable with engaged RIT (OR XIT) I would like to cure the new problem.
>> Can somebody root me in the right direction please
>>
>> 73, Igor UA9CDC
>>