[Elecraft] How to delete the programming of switches one did via K3's intern config menu

[Dick Dievendorff]

Can you assign another function, like toggling SPKR+PH, to the PF key?

Dick, K6KR

On Apr 22, 2012, at 3:01, <astro-peter at maxi-dsl.de> wrote:

> Hi;
> 
> 
> 
> Can anyone tell me how to delete a programmed function switch
> completely.
> 
> 
> 
> What happened:
> 
> 
> 
> Demonstration one of my ham buddies (yet no K3 user J) the K3 and its
> abilities, I carelessly programmed the PF2 with some stuff of the
> "config" menu. Normally an (PF2) a macro was stored, which switched off
> the buid in atu and set power to 60 watts in case I want to use the pa.
> 
> 
> 
> I thought, this wouldn't be a great act and tried to write back the
> marco with the K3 utility program, but I failed. Obviously the utilities
> are not able to write over a programmed function done via the config
> menu - can this be?
> 
> 
> 
> Can someone tell me, how I clear/delete this programmed function done
> via the config menu, in order being able again to write back my
> macro????
> 
> 
> 
> I have already tried an to load up an empty macro without success. It
> seems that I first have to delete the programming I did via K3's intern
> config menu but I can't find out how to do it. There is no access from
> the utilities; there must be a function, surely a switch combination,
> witch deletes the programmed function....
> 
> 
> 
> 
> 
> Many thanks in advance!
> 
> 
> 
> Peter - DL1MDZ
> 
> 
> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html