[Elecraft] KX3 SSB operating notes
Barry LaZar
k3ndm at comcast.net
Fri Apr 20 13:02:48 EDT 2012
Wayne,
I just sold my K2 to a friend so that I would have space for the
KX3 that should be coming soon. He's running 5-10 Watts with an antenna
in the attic that is really less than optimum, yet he's working all
sorts of DX with the reports you're getting from a net close by. Move on
up the spectrum to 15 and 17 and really do some gee whiz things. It
really is a lot of fun. And, like he says "It's like stealing home".
73,
Barry
K3NDM
On 4/20/2012 12:17 PM, Wayne Burdick wrote:
> Believe it or not, every once in awhile I get a break from firmware/
> manuals/etc. and actually get on the air.
>
> I was just listening on 40 m SSB this morning with the KX3 and decided
> to do a little experiment. I shut off the 13.8-V external power supply
> I usually use with the KX3, so the rig was running from the internal
> NiMH pack. I set power to 5 W, which the KX3 can deliver even with the
> supply voltage reading around 9 volts key-down. I located one of the
> many daytime nets on 40 m LSB, tuned up the internal ATU on my random
> wire (not on frequency, of course!) and checked into the net. No
> sweat. I got a 5-7 report from the net control station, a few hundred
> miles away, despite my electrically short antenna that's only 15 feet
> off the ground.
>
> For this contact I was using a Radio Shack headset/mic designed for
> use with computers. It has two 3.5-mm stereo plugs, one for mic, the
> other for stereo audio. The sound quality is surprisingly good. One
> really nice thing about this particular headset is that I don't need
> to touch the MIC BIAS or MIC BTN settings that I use with the Elecraft
> MH3. I just switch to VOX rather than PTT.
>
> Dual watch also comes in handy on 40-m LSB at this time of day. While
> I was listening to a net on 7268.5 with VFO B (in the right audio
> channel), I was tuning around looking for other nets or CQs +/- 15 kHz
> from this frequency with VFO A (in the left channel).
>
> As I was writing this, the KX3's AUTO-OFF timer kicked in and shut
> down the rig, saving my batteries :)
>
> 73,
> Wayne
> N6KR
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list