[Elecraft] Fw: RTTY Questions

[Don Wilhelm]

Matt,

You take the levels one at a time.  Set the K3 Line Out to 9 or 10, then 
adjust your soundcard Line in slider so you have good printing on the 
screen.

Then out the K3 in TX TEST - set the soundcard Line out (or volume) 
slider to about 2/3 of the scale, then adjust the K2 Line in gain to 
produce 4 full bars of ALC indication with the 5th bar flickering.

Note that these are one-time settings.  Unless something in the setup 
changes, there is no need for any additional adjustment.

73,
Don W3FPR

On 4/20/2012 12:11 AM, Matt Murphy wrote:
> Jim wrote: *as long as you take reasonable care to get levels right*
>
> How does one determine the ideal balance of line out volume, line in
> sensitivity, sound card output volume, and sound card mic sensitivity?
>
> 73,
> Matt NQ6N
>
> On Thu, Apr 19, 2012 at 7:02 PM, erehm<erehm at earthlink.net>  wrote:
>
>> Rich - Thanks.  The was really helpful.
>>
>> Wayne - Could FSK control be added to ACC2 GPIO (like K3 ACC DIG0) and PTT
>> toggled via the microphone connector, thus both available simultaneously to
>> external RTTY software?
>>
>> I'm new at this, so apologies if I've proposed something stupid...
>>
>> /eric, kj7ae
>>
>> --
>> View this message in context:
>> http://elecraft.365791.n2.nabble.com/RTTY-Questions-tp7478189p7482903.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>