[Elecraft] PTT foot pedal KX3

[Greg]

I made my own Robert...simple to do.  But I suspect a simple stereo
Y-adapter will do with one male stereo and two female stereo (like a
headphones splitter) will work too.  Just wire the mic as mic+ to tip
and mic- to sleeve.  For the PTT use the PTT signal on the ring and
PTT gnd on the sleeve (you would need to wire your PTT switch to a
male 3.5mm stereo plug to do this).

Like I said...easier to just make your own adapter. :)

73
Greg


On 4/18/12, va3bxg at gmail.com <va3bxg at gmail.com> wrote:
> Does anyone know of a 'pigtail' to allow a foot pedal with  a microphone
> attached to a KX3.
>
> Now I have a K3 pigtail but they are not the same connection obviously
>
>
> Just throwing this out
> Robert
>
> a 'kosher' ham
> Sent from my BlackBerry device
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>