[Elecraft] K3-Data mode RTTY

[W0MU Mike Fatchett]

That makes sense.  I am using a MK II and MMTTY so I guess it doesn't 
matter.  I will have to remember to make sure they are set to 45 baud if 
I use the paddles.

Mike W0MU

W0MU-1 CC Cluster w0mu.net


On 4/16/2012 9:38 PM, Joe Subich, W4TV wrote:
>
> It doesn't matter unless you are sending RTTY with the paddles (or
> software that uses the "KY" commands).  If you are using a normal
> FSK or AFSK interface from the computer the data rate is determined
> by the computer UART or sound card.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 4/16/2012 11:21 PM, W0MU Mike Fatchett wrote:
>> Ok...so maybe I am not going crazy!
>>
>> Unfortunately without pushing the button there is no way to know what
>> baud rate it is set for.
>>
>> I am sure they will figure this out.
>>
>> Mike W0MU
>>
>> W0MU-1 CC Cluster w0mu.net
>>
>>
>> On 4/16/2012 4:25 PM, D Joyce wrote:
>>> Hi Mike:  Yes a number of times.  (four times in the rectnt ARRL RU)
>>> I've also have a problem where the bandwidths&  filters that I set up
>>> in Norm1 and Norm2 don't stick.   I brought both of these to the
>>> attention of K3 Support and they advised that Wayne is aware of the
>>> problem and its on his list.
>>>
>>> 73,  Doug
>>> ----- Original Message ----- From: "W0MU Mike Fatchett"<w0mu at w0mu.com>
>>> To:<elecraft at mailman.qth.net>
>>> Sent: Monday, April 16, 2012 4:58 PM
>>> Subject: [Elecraft] K3-Data mode RTTY
>>>
>>>
>>>> I keep setting the Data MD to 45 baud fsk and somehow the radio has 
>>>> gone
>>>> back to 75 baud a couple of times on it's own.  Anyone else seen this?
>>>> Using MMTTY 1.68.
>>>>
>>>> -- 
>>>> Mike W0MU
>>>>
>>>> W0MU-1 CC Cluster w0mu.net
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>